Beisler 739-23-1 Installation Manual Bedienungsanleitung

Content Page:Part 2: Installation Instructions1.Delivery ... 32.Introduction ...

3.7.2 Adjustment of operating pressureThe operating pressure of the sewing machine is 6 bar.This pressure is displayed on manometer 2.–To adjust the o

3.8 LubricationCaution risk of injury!Oil might cause allergic reactions on skin.Avoid any contact with skin.If skin has been in contact with oil, was

3.9 CommissioningAfter the installation is completed, configure the control system of thesewing machine and carry out a sewing text at a low rotating

128345756

1. DeliveryThe scope of delivery depends on your order.Prior to installation, please check whether all required parts have beensupplied.Equipment:–1 y

3.2 TransportThe unit is equipped with four castors for easy mobility within yourpremises.Caution!Prior to the commissioning of the sewing unit, slide

3.3 Adjustment of working heightThe working table can be adjusted continuously to a height between820 mm and 1080 mm. Upon delivery, the sewing unit i

3.4 Installation of yarn standEnsure that the yarn stand 4 and the unwinding bracket 3 arepositioned at the maximum possible distance from each other

3.5 Installation of suction unitThe suction unit consists of a waste bin 1, the vacuum valve 2, thesuction hose 3 and the vacuum hose 4. The device en

3.6 Power connectionCAUTION!Work at electrical components must be carried outby electricians or other suitably trained staff.Prior to such work, alway

3.7 Pneumatic connection3.7.1 Connection to compressed air maintenance unitFor the operation of the pneumatic devices, the sewing machine mustbe suppl